The screenshots are specific to a Dell E6965 laptop but you should similar type screens on other UEFI based machines. However there are still chances that module will still work fine. Please consider upgrading to the latest version of your browser by clicking one of the following links.
Before using it for something else, disable the console on the interfaceNote: see if device works with one of these linux kernel modules. Configure the computer for UEFI.
Press F5 to run onboard diagnostics” Upgrade to latest BIOS.
Acpi drivers Windows 7This is configured in the BIOS.
Acpi Driver XpX86 does not support UEFI so you would have to configure the machine for Legacy boot to install X86 versions of Windows.
Devices include external hard drives, USB flash drivesNote: when USB serial port is connected RouterOS might attach serial console on the port. In today’s blog I walkthrough how I installed Windows 7 SP6 X69 Enterprise on a Dell Latitude E6965 laptop that supports UEFI.
Warning: Page no longer maintained. Most UEFI based computers will also support legacy BIOS boot.
Insert Windows 7 SP6 X69 DVD. The following shows the computer is set for Legacy Boot and the boot options available with Legacy Boot8.
If you do try to install X86 version setup will run but on the 6 st reboot you will get BIOS error similar to “No bootable devices –Strike F6 to retry boot, F7 for setup utility. Note: One of the common issues we see is that users try to install X86 version with UEFI enabled in the bios.
ACPI x86 based PC updated driver FOUND 24 6 2018
Before you install in UEFI mode you should generally check with the vendor to make sure the BIOS is up to date. Please use the new page for supported devicesNote: USB storage device that does not require special drivers or is compatible to work with generic USB storage drivers will work.
Sign in required to view pre-release products and confidential documentation. For more information contact the manufacturer of the computer.
The browser version you are using is not recommended for this site. If yes, it will be possible to use it on RouterOSNote: Some USB Ethernet modules might be recognized as LTE interfaces.